Carbon Fins Advance

100% CARBON FIBER

Graduated parabolic Fins for explosive restoration of maximum efficiency with minimum energy consumption in extreme conditions of use. The Blades are manufactured with the most sophisticated method VIP from 100% Carbon Aero very dense weaving and greater coherence in combination with leading epoxy resins and controlled hardening process in special ovens. The manufacturing process of blades lasts 4 days.

With the Vacuum Infusion Process we achieve:

• Highest Carbon to resin ratio up to 75% Carbon / 25% Resin by weight.
• Higher Endurance and explosiveness.
• Zero trapping of air bubbles in the resin and carbon. (In contrast to the method of closed molds under pressure).

The use of multiple and complex reinforcements (ribs) with great accuracy allows us to manufacture blades with specific behavior according to the specifications we chose to be on the top blades in the world.

They are Produced in nine different hardnesses:

• (soft1 — soft2 — soft3) up to 75kg
• (med1 — Med2 — MED3) from 75 to 90kg
• (Hard1 — Hard2 — HARD3) from 90kg and upwards.

Characteristics

• Blade's angle: 23°
• Total Blade Length: 760mm.
• Total blade width: 195mm.

It Follows strict quality control before placing them on the market. They are Accompanied with 3 YEARS WARRANTY.